17
4.10 Thermal camera lens safety position
PTZ default setting: baud rate 2400, address 1
When the machine is idle, call number 65 preset and move -90 ° vertical, hide thermal imaging
camera inside PTZ to protect thermal imaging camera lens, the display will appear hint (as shown),
under such circumstances, sending commands to the device camera will not get any action in
response. When you need to use device, call number 66 preset, the device will exit the safety
position, user could normally operate the device.
4.11 Thermal camera image calibration
Thermal camera default setting: baud rate 2400, address 3
The device will calibrate automatically when starting up, user could also calibrate manually by
pressing “a”key. It’s normal phenomenon to hear ”click” during calibration.
4.12 thermal camera polarity switch
Thermal camera default setting: baud rate 2400, address 3, control thermal camera by switching
address to number 3.
Switch thermal camera white hot/black hot display mode by pressing” a ”key.
STANDBY NOW
CALL PRST 66 TO EXIT
