24
change the value where the cursor is
。
Auto save when exit
1
、
Gain
：
XXX
Range: 0~255
。
2
、
Bright
：
XXX
Range :0~255
。
3
、
Exit
：
Press key LENS+ to exit
7 Change RS485 configuration
Make sure to change 485 configuration as follow steps, or the camera may work improperly
：
1
、
change the thermal camera 485 configuration
；
2
、
Change the PTZ 485 configuration
；
3
、
CCD camera was controlled via PTZ, so it’s 485 configuration always keep the same as PTZ
configuration.
7.1 Thermal camera 485 parameter modification
Refer to chapter 6.3 (COM sub-menu)
7.2 PTZ 485 parameter modification
7.2.1 PTZ 485 address modification
Calling number 62 preset to modify PTZ address -1, Calling number 63 preset to modify PTZ
a1. The new address will be effective after restart or the PTZ keeps old address
Note: 1. CCD address always keeps the same as PTZ address
2. CCD video output displays current PTZ485 address, baud rate and protocol
information after PTZ restart.
7.2.2 PTZ baud rate modification
The device automatically recognize PELCO-D and PPELCO-P protocol,2400,4800,9600 and 19200
