Intellinet 525688, User Manual

Page: 42 / 100

39
IV ‐ 3 ‐ 1 ‐ 3 ‐ 1. No Authentication
Authentication is disabled and no password/key is required to connect to the
access point.
Disabling wireless authentication is not recommended. When
disabled, anybody within range can connect to your device’s SSID.
IV ‐ 3 ‐ 1 ‐ 3 ‐ 2. WEP
WEP (Wired Equivalent Privacy) is a basic encryption type. For a higher
level of security, consider using WPA encryption.
Key Length Select 64 ‐ bit or 128 ‐ bit. 128 ‐ bit is more secure
than 64 ‐ bit and is recommended.
Key Type
Choose from “ASCII” (any alphanumerical
character 0 ‐ 9, a ‐ z and A ‐ Z) or “Hex” (any
characters from 0 ‐ 9, a ‐ f and A ‐ F).
Default Key Select which encryption key (1 – 4 below) is the
default key. For security purposes, you can set
up to four keys (below) and change which is
the default key.
Encryption Key 1 –
4
Enter your encryption key/password according
to the format you selected above.
IV ‐ 3 ‐ 1 ‐ 3 ‐ 3. IEEE802.1x/EAP
Key Length Select 64 ‐ bit or 128 ‐ bit. 128 ‐ bit is more secure
than 64 ‐ bit and is recommended.