In Use:
1.
Press either the
TRK 1
or
TRK 2
button
,
depending on which track’s per-stage gates you wish
to edit.
2.
Press the
EDIT
button, followed by the
GATE
button.
The screen displays an overview of every stage’s gate length overrides, and the eight stage
buttons are used to select which stage you wish to edit.
3.
Press the button corresponding to the stage you want to edit.
That stage’s button will flash
green
to indicate which stage number is being edited. On the
screen, the downward pointing arrow also indicates the edited stage.
4.
Turn the encoder to set a gate length override for that stage.
This setting always overrides the track’s GATE length setting.
5.
Repeat Steps 3-4 for any other stages to which you wish to assign pitch or gate values.
As long as you remain on the GATE edit screen, any of the eight stage buttons to which you’ve
assigned a GATE override will light
green
.
Various shortcuts are also available:
● Hold the
EDIT
button and turn the encoder to change the gate length override across all stages
simultaneously.
● Long-press the encoder to remove the gate length override from the
current stage
.
● Hold the
EDIT
button and long-press the encoder to remove the gate length overrides from
all
stages
.
Metropolix Manual
75
