Tuner...
With this function highlighted, click the encoder to activate TUNER MODE and
display the Tuner Screen. Tuner Mode sends a static, octave-selectable pitch
to the PITCH out jacks and a high (or pulsing) gate to the GATE out jacks,
making it easy to quickly tune the connected oscillators. The Tuner Screen
contains two parameters.
Tuner Pitches
C-5 - C+5
Rotating the encoder selects the octave to which
you’ll tune the connected oscillator(s). By
default, TUNER MODE sends 0V
(corresponding to C0), but you can tune to a
higher or lower octave by setting this parameter
to ±C1, ±C2, ±C3, ±C4 or ±C5.
Tuner Gates
Pressing the encoder switches between two
output gate types.
High
Outputs a gate that is “High” for the entire time
you’re in TUNER MODE (thus letting oscillators
drone steadily while you tune them),
Clock
Outputs a gate that pulses with the sequencer
clock, making it easier to tune percussive voices
or any oscillator that runs through a VCA with a
fast closing AD-type envelope. When set to
‘Clock,’ the sequencer must be running in order
to transmit a clocked gated.
Click the EXIT button to exit Tuner Mode.
Metropolix Manual
42
