AUX Input Assignments In Use:
1.
Press the black AUX SETTINGS button beneath whichever AUX input (
X
,
Y
or
Z
) you wish to
configure.
The AUX SETTINGS screen appears, with the
AUX <n> PARAM
field highlighted, indicating its
value can be set by turning the encoder.
NOTE: Notice the small rectangular gauge at the top of the AUX Settings screen. This will
graphically indicate the amount of post-attenuverted CV being applied. Bars extending to the
right of center indicate positive CV, while bars extending to the left of center indicate negative
CV. Any AUX inputs assigned to a trigger or gate function will display an on/off switch (rather
than a continuous voltage bar), so you always have visible feedback of your AUX input’s effect.
2.
Turn the encoder to select the parameter you wish to control with the AUX input, then press the
encoder to confirm your selection.
3.
Press the encoder again to highlight the
AUX ASSIGN
parameter, selecting it for editing.
4.
With the
AUX ASSIGN
parameter highlighted, turn the encoder to select which Track(s)
(
1
,
2
, or
1+2
) you wish to control with the AUX input, then press the encoder to confirm your
track selection.
The incoming AUX CV will now affect the assigned parameter on the chosen track(s).
5.
To reset an AUX assignment back to its default value (i.e. NO assignment), long-press the
encoder.
Metropolix Manual
123
