●
MX ASSIGN
: This parameter displays the Track number (or MOD Lane) that is the source of the
Gx/Qx
outputs. It is set by 1) pressing the encoder to highlight the parameter (moving the
indicator beside the
MX ASSIGN
value), then 2) rotating the encoder to select the source, then 3)
pressing the encoder to apply your selection.
The parameter label and selection options change depending on the selection you made in the
MX EXPANDER
parameter field. Specifically:
If
MX EXPANDER = ’Transport’
or
‘Stage Gates,’
then rotating the encoder (when the
MX ASSIGN
parameter is active) selects which track is the
Gx/Qx
output source.
If
MX EXPANDER = ‘Mod Stg Gates’,
then rotating the encoder (when the
MX ASSIGN
parameter is active) selects which of the 8 MOD Lanes is the
Gx/Qx
output source.
If
MX EXPANDER = ‘Mod Clocks’,
then MX ASSIGN value is fixed to ‘1-8’, meaning clocks
from each of Metropolix’ eight MOD Lanes will appear the eight
Gx/Qx
outputs (using
whatever
CLOCK DIV
settings were selected for each lane’s DIV screen).
NOTE: If you assign the
Trk Out Swap
, then any MX TRK Assignments will “swap” when a high gate initiates the Track Out Swap
feature.
Metropolix Manual
102
