Intel® SRMK2 Internet Server Technical Product Specification
21
2.2.5 System Peripheral Bays
2.2.5.1
CD-ROM and Diskette Drive Bay
The right side of the system (as viewed from the front) contains the CD-ROM and diskette drive
bays. Opening the door in the bezel exposes these peripherals. A slim-line diskette drive is
provided with the system and a slim-line CD-ROM is an optional addition. For information on how
to add/remove the CD-ROM and floppy, please refer to the instruction sheet that comes with the
optional CD-ROM.
2.2.5.2
Internal 3.5” SCSI Hard Drive Bay
Space is provided for two 3.5” long, 1-inch thick hard drives. There are two removable Hudson
drive carriers provided that slide into two front disk drive bays on the front left side of the chassis
(behind the removable front bezel). Each drive can be accessed and replaced by removing the
front bezel, rotating the front panel out of the way (See Figure 3), releasing the handle on the
HDD carrier, and pulling the carrier from the drive bay. A pair of LEDs on the front panel flash
green to indicate drive activity for each drive (LED’s 8 and 9). In addition, the two SCSI HDD
bays are hot swappable.
2.2.6 System Interconnection
2.2.6.1
System Internal Cables
Table 11 lists the internal cables within the system. An
italicized
item is an optional accessory kit
and is not supplied with the base system.
Table 11: System internal cables
Cable Purpose
Qty
Description
SCSI hard drives
1
Standard 68-pin Wide SCSI cable with a LVD/SE terminator which connects
to the serverboard and the SCSI backplane
Front panel
1
50-pin flex cable; connects from front panel connector on the serverboard
to the front panel board.
Fan backplane
1
High density cable connects from the serverboard to the backplane to
provide system management monitoring of the system fans.
Slim-line diskette drive
1
26-pin flex cable; connects from high-density diskette drive connector on
the serverboard to one slim-line diskette drive
Slim-line CD-ROM
drive*
1
Standard 40-pin IDE cable with 2 connectors; connects from secondary IDE
connector on the serverboard to one slim-line CD-ROM drive
* Optional Accessory
