Intel SR2520SA, User Manual

Page: 101 / 164

Intel
®
Server System SR2520SA User’s Guide 79
0XDA A R G R Trying boot device selection
0xDB A R G A Trying boot device selection
0xDC A A OFF R Trying boot device selection
0xDE A A G R Trying boot device selection
0xDF A A G A Trying boot device selection
Pre-EFI Initialization (PEI) Core
0xE0h R R R OFF Started dispatching early initialization modules
(PEIM)
0xE2h R R A OFF Initial memory found, configured, and installed
correctly
0xE1h R R R G Reserved for initialization module use (PEIM)
0xE3h R R A G Reserved for initialization module use (PEIM)
Driver Execution Environment (DXE) Core
0xE4h R A R OFF Entered EFI driver execution phase (DXE)
0xE5h R A R G Started dispatching drivers
0xE6h R A A OFF Started connecting drivers
DXE Drivers
0xE7h R A A G Waiting for user input
0xE8h A R R OFF Checking password
0xE9h A R R G Entering BIOS setup
0xEAh A R A OFF Flash Update
0xEEh A A A OFF Calling Int 19. One beep unless silent boot is
enabled.
0xEFh A A A G Unrecoverable boot failure / S3 resume failure
Runtime Phase / EFI Operating System Boot
0xF4h R A R R Entering Sleep state
0xF5h R A R A Exiting Sleep state
0xF8h A R R R Operating system has requested EFI to close
boot services (ExitBootServices ( ) has been
called)
0xF9h A R R A Operating system has switched to virtual
address mode (SetVirtualAddressMap ( ) has
been called)
Table 8. Diagnostic LED POST Code Decoder