Intel SR2520SA, User Manual

Page: 128 / 164

106 Intel
®
Server System SR2520SA User’s Guide
LED Information
The Intel
®
Server Board S5000PAL includes LEDs that can aid in troubleshooting your
system. A table of these LEDs with a description of their use is listed below.
BIOS POST Beep Codes
The table below lists the POST error beep codes. Prior to system video initialization, the
BIOS uses these beep codes to inform users of error conditions. Please note that not all
error conditions are supported by BIOS beep codes.
Table 11. LED Information
LED Name Function Location LED Color Notes
Power Indicates system power
is on or off
Front control
panel
Green Off = Power is off or in sleep
state S5
On = Power is on or in sleep
stats S0
ID Aid in server
identification from the
back panel
Front control
panel and
board rear left
corner
Blue Press ID LED button or use
Server Management software
to turn the LED on and off.
System
Status
Visible fault warning Control panel
and board rear
left corner
Green or
Amber
Green = No Fault
Green blinking = degraded
condition
Amber blinking = non-critical
error
Amber = critical or non-
recoverable error
Table 12. POST Error Beep Codes
Number of
Beeps
Reason for Beeps and Action to Take
1, 2, or 3 Memory error. Reseat the memory or replace the DIMMs with known good
modules.
4 - 7 or 9 - 11 Fatal error indicating a possible serious system problem. Remove all add-in
cards and re-start the system. If the error still occurs, contact your system
manufacturer. If the beep codes are not generated after the add-in cards
are removed, insert the cards one at a time, booting the system between
each card addition, until the beeps again occur to reveal the malfunctioning
card.
8 Replace or reseat the system video add-in card. If on-board video is bing
used, the server board may be faulty.