Intel SR2520SA, User Manual

Page: 49 / 164

Intel
®
Server System SR2520SA User’s Guide 27
4. Remove the top cover screws. See letter "A" in the figure below.
5. While holding in the blue button at the top of the server system in (see letter "B"),
slide the top cover back until it stops.
6. Insert your finger in the notch (see letter “C”) and lift the cover upward to remove
it.
Figure 17. Removing the Server System Cover
Installing the System Cover
1. Place the cover over the server system so that the side edges of the cover sit just
inside the server system sidewalls.
2. Slide the cover forward until it clicks into place (see letter “A”).
3. Insert the screws at the three locations in the top cover (see letter “B”).
4. Reconnect all peripheral devices and the AC power cord(s).
A
B
C
AF001445