Intel SR2520SA, User Manual

Page: 64 / 164

42 Intel
®
Server System SR2520SA User’s Guide
2. Remove the four screws securing the hard drive bracket in place (see letter “A” in
the figure below). Save the screws; you will use them to install the hard drive
bracket back into the server system.
3. Remove the hard drive bracket from the server system.
4. Install the hard drive(s) into the hard drive bracket using four screws (see letter “B”
in the figure below).
Note: Install screws into the round holes first, then the slotted holes.
5. When all hard drives have been installed in the hard drive cage, reinstall the hard
drive bracket and secure into the server system with the four screws you removed in
step 2 (see letter “C” in the figure below).
Figure 29. Installing Fixed Hard Drive(s) into the Server System
(SR2520SAF/SR2520SAFR)
6. Install the server system cover. For instructions, see “Installing the System Cover” .
7. Plug all peripheral devices and the AC power cable(s) into the server.
AF001665
A
C
B