Intel SR2520SA, User Manual

Page: 71 / 164

Intel
®
Server System SR2520SA User’s Guide 49
9. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
10. Install the server system cover. For instructions, see “Installing the System Cover” .
11. Plug all peripheral devices and the AC power cable(s) into the server.
Removing a PCI Add-in Card
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” .
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see “Removing the System
Cover” .
4. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” .
5. Remove the screw from the selected back panel slot (see letter “A”).
6. Remove the PCI add-in card from the riser card connector (see letter “B”).
Figure 38. Removing an Add-In Card
Note: Make sure that all empty add-in card slots have filler panels installed.
7. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
8. Install the server system cover. For instructions, see “Installing the System Cover” .
9. Plug all peripheral devices and the AC power cable(s) into the server.
B
A
AF001454