Intel SR1690WB - Server System - 0 MB RAM, Service Manual

Page: 68 / 154

50 Intel
®
Server System SR1690WB Service Guide
Installing and Removing the Intel
®
Remote
Management Module 3 and the Intel
®
RMM 3 NIC
Installing the Intel® RMM3 and Intel® RMM3 NIC
1. Squeeze the sides of the Intel
®
RMM3 NIC module cover to disengage it from the
server system back panel and remove it (see letter “A”)
Figure 40. Installing the Intel
®
RMM3 and Intel
®
RMM3 NIC
2. Attach the bracket of Intel
®
RMM3 NIC module by two screws (see letter “A”).
3. Connect the Intel
®
RMM3 cable to the slot on server board (see letter “B”).
4. Attach the Intel
®
RMM3 module to rear chassis by two screws (see letter “C”).
Optical
Device
A
AF003315