Intel SR1690WB - Server System - 0 MB RAM, Service Manual

Page: 70 / 154

52 Intel
®
Server System SR1690WB Service Guide
Removing the Backplane Board
1. Disengage hard drives from the backplane board (see letter “A”).
2. Disconnect all cables from the backplane board.
3. Remove two screws on the top of backplane bracket (see letter “B”).
4. Pull out the backplane assembly vertically from the chassis (see letter “C”).
Figure 42. Removing the backplane board
Installing the Backplane Board
1. Lower the backplane assembly into the system (see letter “A”) and fix the
backplane assembly into fix position, aligning with two screw holes on chassis.
2. Tighten two screws to lock the backplane assembly in position (see letter “B”).
3. Connect data/power cables to the backplane connectors.
4. Engage hard drives back to the backplane (see letter “C”).
AF003300
Optical
Device
C
B
A