Intel SR1690WB - Server System - 0 MB RAM, Service Manual

Page: 36 / 154

18 Intel
®
Server System SR1690WB Service Guide
Note: Blink rate is ~1 Hz at 50% duty cycle.
It is also off when the system is powered off (S5) or in a sleep state (S1).
The power LED sleep indication is maintained on standby by the chipset. If the system is
powered down without going through the BIOS, the LED state in effect at the time of
power off is restored when the system is powered on until the BIOS clear it.
If the system is not powered down normally, it is possible the Power LED will blink at the
same time the system status LED is off due to a failure or configuration change that
prevents the BIOS from running.
System ID Blue On Identify Active via command or button
Off No Identification
System
Status Green On System Ready / No Alarm
Green Blink System ready, but degraded: redundancy lost such as
the power supply or fan failure; non-critical temp/
voltage threshold; battery failure; or predictive power
supply failure.
Amber On Critical Alarm: Critical power modules failure, critical
fans failure, voltage (power supply), critical
temperature and voltage
Amber Blink Non-Critical Alarm: Redundant fan failure, redundant
power module failure, non-critical temperature and
voltage
- Off AC power off: System unplugged AC power on:
System powered off and in standby, no prior
degraded\non-critical\critical state
Table 4. Control Panel LED Functions
LED Color State Description