Standard Control Panel Functionality
Intel®
Server System SR1625UR TPS
62
Revision 1.5
Intel order number E47487-007
Table 49. Standard Control Panel LED Functions
Reference
LED
Color
State
Description
A
NIC1/NIC2
Activity
Green
On
NIC Link
Green
Blink
NIC Activity
B
Power/Sleep
(on standby power)
Green
On
Legacy power on/ACPI S0 state
Blink
1,4
Sleep/ACPI S1 state
Off
Off
Power Off/ACPI S4 or S5 state
C
Disk Activity
Green
Random blink
Provides an indicator for disk activity.
Off
Off
3
No hard disk activity
D
System Status
(on standby power)
Green
On
Running/normal operation
Blink
1,2
Degraded
Amber
On
Critical or non-recoverable condition.
Blink
1,2
Non-critical condition.
Off
Off
POST/system stop.
E
System
Identification
Blue
On
Identify active via command or button.
Off
Off
No Identification.
Notes:
1. Blink rate is ~1 Hz at 50% duty cycle.
2. The amber status takes precedence over the green status. When the amber LED is on or blinking, the
green LED is off.
3. Off when the system is powered off (S4/S5) or in a sleep state (S1).
4. The power LED sleep indication is maintained on standby by the chipset. If the system is powered down
without going through the BIOS, the LED state that is in effect at the time of power off is restored when the
system is powered on until the BIOS clears it. If the system is not powered down normally, it is possible that
the power LED is blinking while the system status LED is off. This is due to a failure or configuration change
that prevents the BIOS from running.
The current limiting resistors for the power LED, the system fault LED, and the NIC LEDs are
located on the server board.
9.2.1
Power/Sleep LED
Table 50. SSI Power LED Operation
State
Power Mode
LED
Description
Power-off
Non-ACPI
Off
System power is off, and the BIOS has not initialized the chipset.
Power-on
Non-ACPI
On
System power is on, but the BIOS has not yet initialized the chipset.
S5
ACPI
Off
Mechanical is off, and the operating system has not saved any
context to the hard disk.
S4
ACPI
Off
Mechanical is off. The operating system has saved context to the
hard disk.
S3-S1
ACPI
Slow blink
1
DC power is still on. The operating system has saved context and
gone into a level of low-power state.
S0
ACPI
Steady on
System and the operating system are up and running.
Notes:
1. Blink rate is ~ 1 Hz at 50% duty cycle.