Intel®
Server System SR1625UR TPS
Mini Control Panel Functionality
Revision 1.5
Intel order number E47487-007
57
8.2.1
Power/Sleep LED
Table 44. SSI Power LED Operation
State
Power Mode
LED
Description
Power-off
Non-ACPI
Off
System power is off, and the BIOS has not initialized the chipset.
Power-on
Non-ACPI
On
System power is on, but the BIOS has not yet initialized the chipset.
S5
ACPI
Off
Mechanical is off, and the operating system has not saved any
context to the hard disk.
S4
ACPI
Off
Mechanical is off. The operating system has saved context to the
hard disk.
S3-S1
ACPI
Slow blink
1
DC power is still on. The operating system has saved context and
gone into a level of low-power state.
S0
ACPI
Steady on
System and the operating system are up and running.
Note:
1. Blink rate is ~ 1 Hz at 50% duty cycle.
8.2.2
System Status LED
Table 45. Control Panel LED Operation
Color
State
Criticality
Description
Off
N/A
Not ready
AC power off
Green
Solid on
Ok
System booted and ready
Green
Blink
Degraded
System degraded
Unable to use all of the installed memory (more than one
DIMM installed).
Correctable errors over a threshold of ten and migrating to a
spare DIMM (memory sparing). This indicates that the user no
longer has spare DIMMs indicating a redundancy lost
condition. The corresponding DIMM LED should light up.
In a mirrored configuration, when memory mirroring takes
place and system loses memory redundancy. This is not
covered by the second bullet above.
Redundancy loss such as power supply or fan. This does not
apply to non-redundant subsystems.
PCI Express* link errors
CPU failure/disabled – if there are two processors and one of
them fails
Fan alarm – Fan failure. Number of operational fans should be
more than the minimum number needed to cool the system
Non-critical threshold crossed – temperature and voltage
Amber
Blink
Non-critical
Non-fatal alarm – system is likely to fail
Critical voltage threshold crossed
VRD hot asserted
Minimum number of fans to cool the system are not present or
have failed
In a non-sparing and non-mirroring mode, if the threshold of
ten correctable errors is crossed within the window
Amber
Solid on
Critical, non-
recoverable
Fatal alarm – system has failed or shut down
DIMM failure when there is one DIMM present and no good
memory is present
Run-time memory uncorrectable error in non-redundant mode
IERR signal asserted