background image

Power Subsystem 

Intel®

 

Server

 

System SR1625UR TPS 

16 

 

Revision 1.5 

Intel order number E47487-007 

3.

 

Power Subsystem 

The power subsystem of the system consists of an integrated Power Distribution Module (PDM), 
a Power Module Enclosure, and support for up to two 650-W power supply modules. The power 
subsystem can be configured to support a single module in a 1+0 non-redundant configuration, 
or dual modules in a 1+1 redundant power configuration. In a 1+1 configuration, a single failed 
power module can be hot-swapped with the system running. Either configuration supports up to 
a maximum of 650 Watts of power. 

This chapter provides technical details on the operation of the power supply module and power 
subsystem. For additional information, refer to the 

Intel

®

 Server System SR1625 AC Power 

Supply Specification

 and the 

Intel

®

 Server System SR1625 Power Distribution Module 

Specification

3.1

 

Mechanical Overview 

 

 

 

Notes:

 

1.  All dimensions are in mm. 
2.  AC inlet can protrude beyond the front panel of the power supply module. 
3.  Fans are powered from +12 V when power supplies are ON. 

4. 

Fans are powered from 5 VSB when in standby mode.

 

Figure 12. Power Supply Module Enclosure - Dimensional Drawing 

320 mm

+/-0.5

 

39.0 

+0.5/-0.5

 

54.5 

+/- 0.5

 

Bi-Color LED 
(PWR/Fail)

 

Airflow direction

 

4.0

 

AC

 

Fan 

Fan 

Beveled to allow smooth insertion into the system 

B

eve

 

39 +/- 0.5 mm 

40.25  
+/- 0.5 mm 

Summary of Contents for SR1625UR - Server System - 0 MB RAM












































































































Reviews: