Server System Features
32
Intel
®
Server System R1000EP Service Guide
Figure 50. Removing the Slimline Optical Drive
4.
If no device will be installed in this location, install a filler panel in this location.
Installing and Removing Intel
®
I/O Expansion Module
Installing Intel
®
I/O Expansion Module
1.
Squeeze the sides of the filler panel to disengage it from the server system back panel and
remove it (see letter
A
).
2.
Secure the screw adapter the position shown below. Position the module over the server board,
fit the front of the module into the back panel slot (see letter
B
).
3.
Attach the module to the server board connector (see letter
C
).
4.
Secure the module with the three screws as shown (see letter
D
).
Figure 51. Installing Intel
®
I/O Expansion Module
Summary of Contents for R1000EP series
Page 12: ......
