Server System Features
Intel
®
Server System R1000EP Service Guide
23
Figure 31. Installing Processor Heatsink
Removing the Processor
1.
Remove the processor heatsink, see Figure 26.
2.
Open the socket lever, see Figure 27.
3.
Open the load plate, see Figure 28.
4.
Remove the processor.
Installing and Removing Memory
Installing Memory
1.
Locate the DIMM sockets. Make sure the clips at either end of the DIMM socket(s) are pushed
outward to the open position (see letter
A
).
2.
Holding the DIMM by the edges, remove it from its anti-static package. Position the DIMM
above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM
socket (see letter
B
).
3.
Insert the bottom edge of the DIMM into the socket (see letter
C
). When the DIMM is inserted,
push down on the top edge of the DIMM until the retaining clips snap into place (see letter
D
).
Make sure the clips are firmly in place (see letter
E
).
Summary of Contents for R1000EP series
Page 12: ......
