Server System Features
18
Intel
®
Server System R1000EP Service Guide
Installing the System Cover
1.
Place system cover onto the chassis and slide forward to engage recessed edge at front of
cover (see letter
A
).
2.
Tighten the four screws (see letter
B
).
Figure 23. Installing the System Cover
Removing and Installing the Air Duct
Always operate your server system with the air duct in place. The air duct is required for proper airflow
within the server system.
Removing the Air Duct
Remove the air duct by lifting straight up.
Figure 24. Removing the Air Duct
Installing the Air Duct
Align the two holes on the air duct with the alignment pins on the chassis and install the air duct
into place. Take care to avoid pinching system cables.
Summary of Contents for R1000EP series
Page 12: ......
