Intel® Server System M20NTP1UR - System Integration and Service Guide
5
Safety Warnings
Heed safety instructions:
Before working with your server product, whether you are using this guide or any other resource as a
reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this
guide to ensure and maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products/components will void the UL
listing and other regulatory approvals of the product and will most likely result in noncompliance with
product regulations in the region(s) in which the product is sold.
System power on/off:
The power button DOES NOT turn off the system AC power. To remove power from the system, you must
unplug the AC power cord. Make sure the AC power cord is unplugged before you open the chassis, add, or
remove any components.
Hazardous conditions, devices and cables:
Hazardous electrical conditions may be present on power, telephone, and communication cables. Turn off
the server and disconnect the power cord, telecommunications systems, networks, and modems attached to
the server before opening it. Otherwise, personal injury or equipment damage can result.
Electrostatic Discharge (ESD):
Electrostatic discharge can damage the computer or the components within it. ESD can occur without the
user feeling a shock while working inside the system chassis or while improperly handling electronic devices
like processors, memory or other storage devices, and add-in cards.
Intel recommends the following steps be taken when performing any procedures described within this
document or while performing service to any computer system.
•
Where available, all system integration and/or service should be performed at a properly equipped
ESD workstation
•
Wear ESD protective gear like a grounded antistatic wrist strap, sole grounders, and/or conductive
shoes
•
Wear an anti-static smock or gown to cover any clothing that may generate an electrostatic charge
•
Remove all jewelry
•
Disconnect all power cables and cords attached to the server before performing any integration or
service
•
Touch any unpainted metal surface of the chassis before performing any integration or service
•
Hold all circuit boards and other electronic components by their edges only
•
After removing electronic devices from the system or from their protective packaging, place them
component side up on to a grounded anti-static surface or conductive workbench pad. Do not place
electronic devices on to the outside of any protective packaging.
Summary of Contents for M20NTP1UR
