Intel M20NTP1UR, System Integration And Serive Manual

Page: 40 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide
40
The system includes an M.2 latch assembly that secures an M.2 SSD to the server board. To support different
M.2 SSD form factors, the latch can be mounted within any of three mounting locations on the server board
as shown in Figure 39 . The system supports the following M.2 SSD form factors: 2242 (42 mm), 2280 (80
mm) and 22110 (110 mm).
5. Mount the M.2 latch assembly to the server board. (See Figure 39 )
)
Figure 39. M.2 Mounting Latch Placement
•
Locate and install the M.2 SSD latch assembly into one of the three mounting holes on the server
board (see Letter “A”)
•
Rotate the M.2 SSD latch assembly 90 degrees counter clockwise to secure it to the server board
(see Letter “B”).
6. Install the M.2 SSD to the server board
Figure 40. M.2 SSD Installation
• Locate and carefully unpack the M.2 SSD. Hold it by its edges. Do not touch the gold contacts.
•
Line up the alignment feature of the M.2 SSD edge connector with the alignment key within M.2
SSD slot connector on the server board.
•
Carefully insert the M.2 SSD into the slot connector (see Letter “A”).
•
Push down on the free end of the M.2 SSD until it lays flat on the M.2 latch assembly (see Letter
“B”).
•
Slide the blue latch over the back edge of the M.2 SSD to secure it to the server board (see Letter
“C”).