Intel M20NTP1UR System Integration And Serive Manual Download Page 45

Page: 45 / 114

Intel® Server System M20NTP1UR - System Integration and Service Guide

System Software Updates and Configuration

The Intel® Server System M20NTP1UR includes a system software stack that consists of:

•

System BIOS

•

Baseboard Management Controller (BMC) firmware

Together, they configure and manage features and functions of the server system. A full software stack is

installed during the system manufacturing process but may not be the latest available. Intel highly

recommends updating the full system software stack to the latest available version for optimal performance

and system reliability. A System Update Package (SUP) containing the latest available system software stack

can be downloaded from the following Intel website:

http://downloadcenter.intel.com.

For an overview on BIOS Boot Menu, Setup, and hot keys, see the

Intel® Server M20NTP Family BIOS Setup

User Guide.

Summary of Contents for M20NTP1UR



















































































































Search results

Summary of Contents for M20NTP1UR

Reviews:

Related manuals for M20NTP1UR

Brands by name

Popular brands

Intel M20NTP1UR, System Integration And Serive Manual

Search results

Summary of Contents for M20NTP1UR

Reviews:

Related manuals for M20NTP1UR

Brands by name

Popular brands