Intel Express 510T, User Manual

Page: 58 / 126

681872.bok : 68187203 48 Mon Apr 20 15:35:05 1998
Standard Configuration
Changing the Setup of the Port
48
3
TFTP
Changing password
details
To give added security, you can limit the number of staff authorized
to transfer TFTP files by changing the TFTP password. To change the
password.
1
Select
Configuration>Device Setup
.
2
Click
TFTP
.
3 Type the old password.
4
Type the new password.
5
Again, type the new password (in
Retype new
).
6 Select
OK
.
Changing the Setup of the Port
Purpose
You can configure the port to operate in different ways—according
to your network’s requirements:
■
Change the port state
■
Select the auto-negotiation mode
■
Change each port to half or full duplex
If not enabled by auto-negotiation
■
Specify the speed of the port
If not enabled by auto-negotiation
■
Change the forwarding mode of the port
■
Change the flow control setting of the port
Using the mouse
There are three methods of obtaining the Device Setup window:
■
Use the pull-down menus
■
Double left-click on the port
■
Right-click on the switch