Intel Express 510T, User Manual

Page: 25 / 126

681872.bok : 68187201 15 Mon Apr 20 15:35:05 1998
Installation
Express 510T Switch
15
■
All ports, IP addresses and MAC addresses are in the same
VLAN (named <System>). VLANs allow you to create virtual
networks using specific switch ports, IP addresses and MAC
addresses.
■
Local Management time-out after 10 minutes.
After start-up
This default configuration is adequate for simple workgroup environ-
ments to operate in basic switching mode.
Although the switch continues to operate without problems, we rec-
ommend that you change certain parameters to suit your own require-
ments.
Follow the instructions in chapter 2 to change the configuration while
the switch is operating.
Other LEDs on the front panel
Introduction
There are three other LEDs and one button (on the front panel) to
show how the switch is operating:
■
Status LED
■
Temperature LED
■
Redundant Power Supply (RPS) LED
■
Port Settings button
LED colors and their
meanings
The LEDs give information about the state of the switch:
LED Color Meaning
Status Green Solid: The switch is operating normally.
Blinking (1 Hz): Updating software or
forced boot.
Blinking (5 Hz): Running in mainte-
nance mode.
Red Resetting the switch, detecting hardware
errors or software traps.