95
|
P a g e
Figure 46:
Air compressor oil sight glass and fill cap
Draining the air compressor tank and air filter
1.
Open the drain cock on the compressed air tanks to drain any
water condensate.
2.
Drain the compressed air filter.
If the system does not have an automatic drain, open the
drain cock on the filter bowl to drain any water
condensate.
If the system has an automated drain, leave the drain cock
open for the automated drain to work.
Inspecting the packing gland on the emulsion pumps
Inspect for leaking below the pump. If there is leaking, tighten the
packing gland nuts (located near the driveshaft, see Figure 47) until
leaking at the driveshaft is no longer observed. Do not over tighten.
Oil fill cap
Oil sight glass
