67
|
P a g e
Spray bar vacuum screen
Use the Spray Bar Vacuum screen (Figure 37) to set the spray bar to be
vacuumed and initiate the pump.
Figure 37:
Spray bar vacuum screen
Vacuuming a section of the spray bar
1.
Use the
multi‐navigation key
[5R] to select spray bars: left and
right front, center, or left and right rear. They will highlight in
green.
2.
Press the
Pump
key [4R] to activate the Spray Bar Vacuum pump
function. “Warning pump will start!” will appear.
3.
Press the
Yes
key [1R] to start the pump. The rate will turn green.
Note:
The rate is fixed.
Note:
If the spray master switch on the pendant control is
on, the display will advise “Turn off the master switch!”
