60 |
P a g e
Sprayer selection screen
Use the Sprayer Selection screen (Figure 33) to select/deselect the spray
nozzles or gangs of nozzles that will spray.
Also use this screen to extend or retract the telescoping spray bars and to
tilt the front spray bar housing up and down.
Figure 33:
Sprayer Selection screen: some switches selected, pump on in
Auto Spray, and master spray switch on
The upper row of switches is for the left and right telescoping spray bars.
Each of the telescoping spray bars has a group of switches that control an
individual nozzle (the outer nozzles) and a group of switches that control
a “gang” of nozzles (the inner nozzles).
The bottom row of switches is for the front center section and the left
and right rear spray bar sections. All of these switches control a “gang” of
nozzles.
As noted on the bottom of the screen, the color of the switch also
indicates whether it is for an individual nozzle (blue) or a gang of nozzles
(green).
Flow, speed and application rates are readouts only. Change application
rate by selecting
Pump Function
>
Spray Auto
.
