49
|
P a g e
View emulsion flow rate
Enter small and large emulsion pump calibration factors
Change vehicle speed calibration factors
Select the language used by the display screen unit
Change measurement units
Pendant control
The pendant control is a hand control for the spray paver. Two different
models are available:
Standard pendant control:
The standard pendant control (Figure 27) is
used by the seated operator or an operator riding on the screed. It has
the following controls:
The red mushroom (on/off) button serves as the power switch for
turning on/off the spray paving system and also is the emergency
stop button. Pull it up to power on. Press it down to disable
power.
The green (on) and red (off) buttons are the master spray switch
and will open or close the spray nozzle valves selected on the
display screen unit.
Off (red) must be selected before starting the pump in
Spray Auto and opening the nozzles in Spray Bar Vacuum.
On (green) turns selected spray nozzles on.
Note:
In certain pump functions the master spray switch is
disabled. For example, an operator should not be operating the
spray nozzles while running the Tank Load function, so the master
spray switch is disabled for this pump function. See page 58 for
more detail.