c.
signal wiring
10
16. reMOve the factOrY aMplifier & Bracket
Using a 10mm socket, remove the nut fastening the factory am-
plifier bracket to the vehicle. Slide the amplifier bracket forward
to clear the mushroom studs and remove the amp and bracket.
17. discOnnect factOrY aMplifier harness
Disconnect the factory wiring harness from the amplifier by
pressing in the locking tab (1) and sliding the locking lever (2) to
the left as viewed in the image.
18. reMOve the factOrY aMplifier frOM the Bracket
Using an 8mm socket, remove the machine bolt that fastens the
factory amplifier to the bracket. Slide the amplifier off the brack-
et (you may need to gently use a screwdriver to free the amp from
the bracket).
19. relOcate factOrY aMplifier (step 1)
Loosen/free the 12V power outlet wire bundle by sliding the plas-
tic retaining clip off the mounting stud.
20. relOcate factOrY aMplifier (step 2)
Loosen/free the sound liner by removing the center pin expansion
clip. Pull the sound liner down and forward to access the area
behind it.
