Integra DTR-50.3, Instruction Manual

Page: 46 / 100

46
En
Note
• For composite video, S-Video, and component video
upconversion for the HDMI output, the “ Monitor Out ” setting
must be set to other than “ Analog ” (
➔
page 44 ), and the
“ HDMI Input ” setting must be set to “ - - - - - ”. See
“Connection Tips and Video Signal Path” for more information
on video signal flow and upconversion (
➔
page 88 ).
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of “
Component Video Input ”.
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “ Digital
Audio Input ” (
➔
page 46 ). In this case, if you want to use the
coaxial or optical audio input, make the appropriate selection in
the “
Audio Selector ” setting (
➔
page 57 ).
• The “ TUNER ” selector cannot be assigned and is fixed to the
“ - - - - - ” option.
• “ AUX ” is used only for input from the front panel.
• Do not assign an
HDMI IN
to the
TV/CD
selector while “ HDMI
Control(RIHD) ” is set to “ On ” (
➔
page 60 ), otherwise
appropriate CEC (Consumer Electronics Control) operation will
not be guaranteed.
• If you assign “ - - - - - ” to an input selector that is currently
selected in “ HDMI Through ” (
➔
page 60 ), the “ HDMI
Through ” setting will be automatically switched to “ Off ”.
• If you connect a component (such as UP-A1 Dock with docked
iPod/iPhone) to the UNIVERSAL PORT jack, you cannot
assign any input to the “ PORT ” selector.
Component Video Input
If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2 , you must assign “ IN2 ” to
the “ BD/DVD ” input selector.
If you’ve connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are
upconverted
*
and output by the COMPONENT VIDEO
MONITOR OUT
*1
. You can set this for each input
selector by selecting the “ - - - - - ” option.
*1
This applies only when “ Monitor Out ” setting is set to
“ Analog ” (
➔
page 44 ).
Here are the default assignments.
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TV/CD, PHONO, PORT
`
IN1 , IN2 , IN3 :
Select a corresponding component video input to
which the video component has been connected.
`
- - - - - :
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT
, for the
output from composite video, S-Video, and
component video sources.
Note
• For composite video and S-Video upconversion for the
COMPONENT VIDEO MONITOR OUT , the “ Monitor Out ”
setting must be set to “ Analog ” (
➔
page 44 ), and the
“ Component Video Input ” setting must be set to “ - - - - - ”. See
“Connection Tips and Video Signal Path” for more information
on video signal flow and upconversion (
➔
page 88
).
• If not connected to the same output you have selected in the
“ Monitor Out ” setting, the “ Monitor Out ” setting will be
automatically switched to “ Analog ” (
➔
page 44
).
• If you connect a component (such as UP-A1 Dock with docked
iPod/iPhone) to the UNIVERSAL PORT jack, you cannot
assign any input to the “ PORT ” selector.
• The “ TUNER ” selector cannot be assigned and is fixed to the
“ - - - - - ” option.
Digital Audio Input
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the
OPTICAL IN 1 , you
must assign “ OPTICAL1 ” to the “ TV/CD ” input
selector.
Here are the default assignments.
■
BD/DVD , VCR/DVR , CBL/SAT , GAME , PC ,
TV/CD , PHONO , PORT
`
COAXIAL1 , COAXIAL2 , COAXIAL3 ,
OPTICAL1 , OPTICAL2 :
Select a corresponding digital audio input to which
the component has been connected.
`
- - - - - :
Select if the component is connected to an analog
audio input.
Note
• When an HDMI IN is assigned to an input selector in “ HDMI
Input ” (
➔
page 45
), the same
HDMI IN
will be set as a priority
in this assignment. In this case, if you want to use the coaxial or
optical audio input, make the selection in the “
Audio Selector ”
(
➔
page 57
).
Input selector Default assignment
BD/DVD IN1
VCR/DVR - - - - -
CBL/SAT IN2
GAME IN3
PC - - - - -
AUX - - - - -
TV/CD - - - - -
PHONO - - - - -
PORT - - - - -
IN
OUT
Composite video, S-Video Component video
Composite video, S-Video Component video
Input selector Default assignment
BD/DVD COAXIAL1
VCR/DVR COAXIAL2
CBL/SAT COAXIAL3
GAME OPTICAL1
PC - - - - -
AUX FRONT (Fixed)
TV/CD OPTICAL2
PHONO - - - - -
PORT - - - - -