44
En
Main Menu
Input/Output Assign
Monitor Out
On the “
Monitor Out
” settings, you can select whether or
not to have the video sources’ images output through the
HDMI output.
If you connect your TV to HDMI output, “
Monitor Out
”
setting is automatically set and composite video, S-Video,
and component video sources are upconverted
*
and
output.
If you connect your TV to the
COMPONENT VIDEO
MONITOR OUT
(not the HDMI output), “
Monitor Out
”
setting is automatically set and composite video and S-
Video sources are upconverted
*
and output.
Note
• See “Video Connection Formats” (
➔
page 88
) for charts
showing how the “
Monitor Out
” and “
Resolution
” settings
affect the video signal flow through the AV receiver.
■
Monitor Out
`
Analog
:
Select this if your TV is connected to the
COMPONENT VIDEO MONITOR OUT
,
MONITOR OUT S
, or
MONITOR OUT V
.
`
HDMI Main
:
Select this if your TV is connected to
HDMI OUT
MAIN
.
`
HDMI Sub
:
Select this if your TV is connected to
HDMI OUT
SUB
.
`
Both
:
Select this if your TVs are connected to
HDMI OUT
MAIN
and
HDMI OUT SUB
. Video signals are
output from both HDMI outputs at the resolution
supported by both TVs.
`
Both(Main)
:
Select this if your TVs are connected to
HDMI OUT
MAIN
and
HDMI OUT SUB
. Video signals are
output from both HDMI outputs but
HDMI OUT
MAIN
will become a priority; depending on the
resolution, video signals may not be output from
HDMI OUT SUB
.
`
Both(Sub)
:
Select this if your TVs are connected to
HDMI OUT
MAIN
and
HDMI OUT SUB
. Video signals are
output from both HDMI outputs but
HDMI OUT
SUB
will become a priority; depending on the
resolution, video signals may not be output from
HDMI OUT MAIN
.
Note
• If not connected to the same output you have selected in the
“
Monitor Out
” setting, the “
Monitor Out
” setting will be
automatically switched to “
Analog
” (
➔
page 89
).
• When using the DeepColor function, if the “
Monitor Out
”
setting is set to “
Both(Main)
” or “
Both(Sub)
”, the number of
bits may be limited due to the capability of your TV connected
to a priority output.
Changing the “Monitor Out” setting manually
Input/Output Assign
IN
OUT
Composite video, S-Video,
component video
HDMI
HDMI
Composite video, S-Video,
component video
IN
OUT
Composite video, S-Video
Component video
Composite video, S-Video
Component video
1
Press
Monitor Out
on the front panel.
The current setting is displayed.
2
Press
Monitor Out
on the AV receiver repeatedly
to select:
`
Analog
,
HDMI Main
,
HDMI Sub
,
Both
,
Both(Main)
or
Both(Sub)
Summary of Contents for DTR-50.3
Page 1: ...AV Receiver DTR 50 3 Instruction Manual...
Page 99: ...99 En Memo...