SCR
Operating Principle
35
Access to the Web Interface
How to access the web interface basically.
The device is ready for operation and you have access to it (refer to
Commissioning section).
1.
Start the web browser and enter the IP address into the address bar.
The factory default IP address is 192.168.1.1.
A login screen will prompt you to enter the user name and the
password for authentication.
Due to reasons of security, the session will be terminated after 10
minutes of inactivity and you need to login again.
2.
Enter the user name and the password and click OK.
The default settings of the web interface are as follows:
the user name is "insys", the password is "icom".
The start page of the web interface is displayed.
3.
Use the menu on the left side to select the menu item, in which you
want to change settings.
4.
Enter the required settings.
5.
Click on the button OK on the according configuration page to save
the settings in the profile.
Consider the information in the profile section about the effectivity of
configurations made.
Language selection in the web interface
How to change the language in the web interface.
The device is ready for operation and you have access to the web interface.
1.
Select in the title bar the button
for German or
for English.
The web interface is displayed in the selected language then.
