Assembly
SCR
28
8.1
Screw mounting
The four mounting lugs provided at the housing allow mounting on even and stable
underground. The mounting material is not included and must be selected accord-
ing to the underground.
Mounting the device using screws
How to mount the router to an even underground:
The underground is level (make even if required) and sufficiently stable.
You have four suitable screws (max. diameter 4 mm), four suiting washers
and, if required, four suiting dowels.
If the underground is not level, it might be compensated if required
(e.g. by shimming with washers) to avoid that a mounting lug breaks
off if it is folded too much during fastening.
2.
Mark the four bore holes using the device or the specified dimensions
on the underground.
Do not forget to provide sufficient space under and above the router
for connecting the necessary cables. The cables must not be bended
excessively. The space may be reduced when using angular
connectors.
3.
Drill the four mounting bores using a suitable drill bit in the required
diameter into the underground.
