SCR
Using Open Source Software
15
3
Using Open Source Software
3.1
General Information
Our product {{{PRODUKTBEZEICHNUNG}}} contains, amongst others, so-called
open-source software that is provided by third parties and has been published for
free public use. The open-source software is subject to special open-source soft-
ware licenses and the copyright of third parties. Basically, each customer can use
the open-source software freely in compliance with the licensing terms of the re-
spective producers. The rights of the customer to use the open-source software be-
yond the purpose of our product are regulated in detail by the respective concerned
open-source software licenses. The customer use the open-source software freely,
as provided in the respective effective license, beyond the purpose tha t the open-
source software gets in our product. In case there is a contradiction between the
licensing terms for our product and the respective open-source software license,
the respective relevant open-source software license takes priority over our licens-
ing terms, as far as the respective open-source software is concerned by this.
The use of the used open-source software is possible free of charge. We do not de-
mand usage fees or any comparable fees for the use of the open-source software
contained in our product. The use of the open-source software in our product by
the customer is not part of the earnings we achieve with the contractual compen-
sation.
All open-source software programs contained in our product can be taken from the
available list. The most important open-source software licenses are listed in the Li-
censes section at the end of this publication.
As far as programs contained in our product are subject to the GNU General Public
License (GPL), GNU Lesser General Public License (LGPL), Clarifie d Artistic License
or another open-source software license, which regulates that the source code
must be made available, and if this software is not already delivered in source code
on a data carrier with our product, we will send you this at any time upon request.
If it is required to send this on a data carrier, the sending will be made against pay-
ment of a cost compensation of €
10,00. Our offer to send the source code upon
request ceases automatically 3 years after delivery of our product to the custome r.
Requests must be directed to the following address, if possible under specification
of the serial number:
INSYS MICROELECTRONICS GmbH
Hermann-Köhl-Str. 22
93049 Regensburg, Germany
Phone +49 941 58692 0
Fax +49 941 58692 45
E-mail: [email protected]
