SCR
Assembly
27
8
Assembly
The SCR can be mounted in two different ways:
•
Screw mounting using the four mounting lugs
•
DIN rail mounting using the optional DIN rail adapter
This section describes how to mount the SCR, connect the power supply and
uninstall it again. Observe the instructions in the "Safety" section of this
manual, in particular the "Safety Instructions for Electrical Installation" for that
purpose unconditionally.
Caution!
Moisture and liquids from the environment may seep into
the interior of the device!
Fire hazard and damage of the product.
The device must not be used in wet or damp
environments, or in the direct vicinity of water. Install the
device at a dry location, protected from water spray.
Disconnect the power supply before you perform any work
on a device which may have been in contact with
moisture.
Caution!
The device could be destroyed if the wrong power supply
is used!
If the device is operated with a power supply that supplies
a voltage exceeding the permissible operating voltage, it
will be destroyed.
Make sure that you use the suitable power supply. Refer to
the Technical Data section for the proper voltage range.
