SCR
Assembly
29
4.
Screw the router against the underground at all four mounting lugs
with a wahser under the screw head.
The router is now readily mounted.
8.2
DIN rail mounting
The optional DIN rail adapter (article no. 10020884) is required for DIN rail mount-
ing. Depending on the space available in the switch cabinet, the ada pter may be in-
serted into the groove at the back or at the side (more space in width or depth).
The four mounting lugs may be broken off without any tools at the rated breaking
point, if required.
Mounting the device to the DIN rail
How to mount the router to a DIN rail:
1.
Attach the DIN rail adapter to the router with the spring facing
upwards. Use the two screws and square nuts delivered with the
adapter for this. The square nuts must be inserted into a groove and
then tightened to the router centrally.
2.
Place the device at the DIN rail Hook the upper DIN rail groove into
place behind the upper edge of the DIN rail.
3.
Fold down the device perpendicular to the DIN rail until the lower
DIN rail groove latches in the DIN rail.
The router is now readily mounted.
Removing the device from the DIN rail
How to uninstall the router from a DIN rail in a switch cabinet:
The power supply of the switch cabinet is switched off and secured against
being switched on accidentally.
All connectors at the device are disconnected.
1.
Push the device slightly down to compress the retaining spring and
swing it away from the DIN rail.
2.
Un-hook the device and take it off perpendicularly to the DIN rail.
The router is now removed.
