INSYS Modem 336 LL 2D/4D 5.x Originate / Answer
Functions
12.13
Switching on the Remote Configuration
The INSYS Modem 336 LL 2D/4D 5.x Originate / Answer can be configured remotely. It
has a remote configuration mode. To configure the INSYS Modem 336 LL 2D/4D 5.x
Originate / Answer remotely, a data connection to the modem to be configured must be
established. This can be performed by calling the INSYS Modem 336 LL 2D/4D 5.x Origi-
nate / Answer from any modem. After switching into the remote configuration mode, AT
commands can be sent to configure the INSYS Modem 336 LL 2D/4D 5.x Originate / An-
swer.
To switch into the remote configuration mode, a data connection must be established
between the modems. If the INSYS Modem 336 LL 2D/4D 5.x Originate / Answer recog-
nizes the character string "
****
" in the data stream and if no data traffic takes place
after that for 1 second, the INSYS Modem 336 LL 2D/4D 5.x Originate / Answer will
switch to the remote configuration. It will then send a response and a prompt to enter
the password of the remote configuration. A particular connection type is not manda-
tory. We recommend using only error-corrected connections for the remote configura-
tion to avoid AT command transfer errors.
The remote configuration is active as default.
Configuration with AT commands
To turn the remote configuration on, use the
command:
AT*R1
To enter a password for the remote configura-
tion, use the command:
AT*C
Save the settings with:
AT&W
43
Summary of Contents for Modem 336 LL 2D/4D 5.x Originate / Answer
Page 1: ...Manual INSYS Modem 336 LL 2D 4D 5 x Originate Answer INSYS Modem 336 Leased Line Apr 10...
Page 2: ......
Page 80: ......
