Installation
INSYS Modem 336 LL 2D/4D 5.x Originate / Answer
Mount the device to the DIN rail
Instructions on how to mount the INSYS Modem 336 LL 2D/4D 5.x Origi-
nate / Answer to a DIN rail.
1.
Position the device at the DIN rail as seen in the following diagram. There
are two snap-in hooks at the outer edge of the DIN rail groove of the INSYS
Modem 336 LL 2D/4D 5.x Originate / Answer. Hook them into place behind
the upper edge of the DIN rail when connecting the device.
2.
Lift the INSYS Modem 336 LL 2D/4D 5.x Originate / Answer perpendicular to
the DIN rail until the plastic spring of the third, flexible snap-in hook en-
gages in the DIN rail.
The INSYS Modem 336 LL 2D/4D 5.x Originate / Answer is now completely
mounted.
Connecting the power supply
The device has already been mounted to the DIN rail.
The power supply is connected and switched off.
1.
Connect the ground lead of the power supply to the terminal "GND".
2.
Connect the plus pole of the power supply to the terminal for the power
supply.
22
Summary of Contents for Modem 336 LL 2D/4D 5.x Originate / Answer
Page 1: ...Manual INSYS Modem 336 LL 2D 4D 5 x Originate Answer INSYS Modem 336 Leased Line Apr 10...
Page 2: ......
Page 80: ......
