background image

INSTEON-compatible RemoteLinc User’s Guide 

Page 18 of 18 

Limited Warranty 

Seller warrants to the original consumer purchaser of this product that, for a period of two years from the 
date of purchase, this product will be free from defects in material and workmanship and will perform in 
substantial conformity to the description of the product in this User’s Guide.  This warranty shall not apply 
to defects or errors caused by misuse or neglect.  If the product is found to be defective in material or 
workmanship, or if the product does not perform as warranted above during the warranty period, Seller 
will either repair it, replace it or refund the purchase price, at its option, upon receipt of the product at the 
address below, postage prepaid, with proof of the date of purchase and an explanation of the defect or 
error.  The repair, replacement, or refund that is provided for above shall be the full extent of Seller’s 
liability with respect to this product.  For repair or replacement during the warranty period, call SmartLabs 
customer service to receive an RA# (return authorization number), properly package the product (with the 
RA# clearly printed on the outside of the package) and send the product, along with all other required 
materials, to: 

SmartLabs, Inc. 
ATTN: Receiving Dept. 
16542 Millikan Ave. 
Irvine, CA 92606-5027 

Limitations 

The above warranty is in lieu of and seller disclaims all other warranties, whether oral or written, express 
or implied, including and warranty or merchantability or fitness for a particular purpose.  Any implied 
warranty, including any warranty of merchantability or fitness for a particular purpose, which may not be 
disclaimed or supplanted as provided above shall be limited to the one-year period of the express 
warranty above.  No other representation or claim of any nature by any person shall be binding upon 
seller or modify the terms of the above warranty and disclaimer.  In no event shall seller be liable for 
special, incidental, consequential, or other damages resulting from the possession or use of this product, 
including without limitation damage to property and, to the extent permitted by law, personal injury, even if 
seller knew or should have known of the possibility of such damages.  Some states do not allow 
limitations on how long an implied warranty lasts and/or the exclusion or limitation of damages, in which 
case the above limitations and/or exclusions may not apply to you.  You may also have other legal rights 
that may vary from state to state. 

 

Rev 06-17-2009 

 

 

 

 

Summary of Contents for RemoteLinc



















Reviews: