INSTEON-compatible RemoteLinc User’s Guide
Page 12 of 18
Using the BRIGHT and DIM Buttons
The BRIGHT and DIM Buttons will brighten or dim only those INSTEON
Devices linked to the last ON/OFF Button you used. Switchable modules will
not be affected. Pressing and holding the BRIGHT and DIM Buttons will adjust
the brightness continuously, while tapping the buttons will adjust the brightness
one of 32 steps for each tap.
•
To continuously brighten only those INSTEON Devices linked to the last ON/OFF Button you used,
press and hold
the BRIGHT Button
. RemoteLinc will beep and its Status LED will blink off once.
Dimmable modules will begin to brighten, unless they are already fully bright. Switchable modules
will not be affected. When you release the button, dimmable modules will stop going brighter and
RemoteLinc’s Status LED will blink off again.
•
To continuously dim only those INSTEON Devices linked to the last ON/OFF Button you used,
press
and hold
the DIM Button
. RemoteLinc will beep and its Status LED will blink off once. Dimmable
modules will begin to dim, unless they are already fully off. Switchable modules will not be affected.
When you release the button, dimmable modules will stop dimming and RemoteLinc’s Status LED will
blink off again.
•
To brighten by incremental steps only those INSTEON Devices linked to the last ON/OFF Button Pair
you used,
tap
the BRIGHT Button
. RemoteLinc will beep and its Status LED will blink off once.
Dimmable modules will brighten 3 of 32 steps for each tap of the button, unless they are already fully
bright. Switchable modules will not be affected.
•
To dim by incremental steps only those INSTEON Devices linked to the last ON/OFF Button you
used,
tap
the DIM Button
. RemoteLinc will beep and its Status LED will blink off once. Dimmable
modules will dim 3 of 32 steps for each tap of the button, unless they are already fully off. Switchable
modules will not be affected.