ControLinc Owner’s Manual
Installing ControLinc
Plug ControLinc into an unswitched wall receptacle
The ControLinc Status LED should turn on solid
USING CONTROLINC
Using the ControLinc Buttons
On/Off Button Pairs
The On and Off buttons have a dual purpose. The buttons can be tapped to turn the Linked Responders
on and off. If held down, the On button will brighten and the Off button will dim any dimmable Linked
Responders.
NOTE: Press & holding the buttons will not affect any non-dimming Responders.
•
To turn on
all Responders Linked to a particular button pair, tap the On button
Dimmable Responders should go to whatever On-Level they were set for, at whatever Ramp
Rate they were set up for
Non-dimming Responders should immediately go full-on
•
To turn off
all Responders Linked to a particular button pair, tap the Off button
Dimmable Responders should go full-off at whatever Ramp Rate they were set for
Non-dimming Responders should immediately go full-off
•
To brighten
all dimmable Responders Linked to a particular button pair, press & hold the On
button
Dimmable Responders should brighten, unless they are already at full-bright
When you release the button, the dimmable Responders should stop brightening.
•
To dim
all dimmable Responders Linked to a particular button pair, press & hold the Off button
Dimmable Responders should dim, unless they are already off
When you release the button, the dimmable Responders should stop dimming.
All On/All Off Buttons
The All On and All Off buttons will turn on or off
all
Responders Linked to ControLinc, no matter which
On/Off button pair they are Linked to.
•
To turn on
all
Responders
Linked to ControLinc, tap the All On button
Dimmable Responders should go to whatever On-Level they were set for, at whatever Ramp
Rate they were set up for
Non-dimming Responders should immediately go full-on
•
To turn off
all
Responders
Linked to ControLinc, tap the All Off button
All Responders should go full-off at whatever Ramp Rate they were set for
Page 5 of 15
