35
Installation instructions & user guide
T210042 v1.00 March 2022 - InstaTap Commercial
9.1.2 Flush the filter
• Turn OFF the power supply to the under
counter appliances.
• Turn OFF the water supply to the under
counter appliances with the isolation valve
on the install rail.
• Disconnect the water supply hose to one
of the under counter appliances.
• Turn ON the isolation valve on the install
rail.
• Flush the new filter with the volume of
water stated in the instructions supplied
with the filter - usually a minimum of 10
litres.
• Turn ON the water supply to the under
counter appliances with the isolation
valve.
• Turn ON the power supply to the under
counter appliances.
OFF
• Direct the water supply hose into a sink or suitable
container.
ON
OFF
• Turn OFF the isolation valve.
• Reconnect the mains supply hose to the
under counter appliance.
ON
• Be aware, depending on the water block setting ,it may trip and need to be
reset during the flushing process, see page 20.
SECTION 9 Maintenance
