36
Installation instructions & user guide
T210047 v1.00 March 2022 - InstaTap Commercial
SECTION 9 Maintenance
ON/OFF button
9.1.3 UCB filter monitor settings
• The under counter boiler has different settings for SOFT, MEDIUM & HARD
water conditions.
• The filter monitor is factory-set to MEDIUM which is suitable for most parts
of the UK with average or medium water hardness.
• The effectiveness of the filter will be reduced in hard water areas (and
should be replaced more frequently), or extended in soft water areas
where limescale is less of a problem.
• If in doubt as to the hardness of water supplied in your area, consult your
local water authority or call Technical Support on 0345 6 005 005.
NOT
READY
o
C
HEATING
NOT
READY
o
C
HEATING
70
o
C
SOFT
MEDIUM HARD
CHANGE FILTER
Pr
READY
o
C
96
CAUTION
HOT WATER
NOT
READY
o
C
96
CHECK
WATER
!
!
CHANGE FILTER
NOT
READY
OF
!
!
READY
CHECK
WATER
!
!
READY
!
!
CLEAN
PROBES
READY
MEDIUM
!
!
NOT
READY
o
C
!
CHECK
WATER
READY
o
C
96
CAUTION
HOT WATER
• After releasing the ON/OFF button (above the
temperature setting is displayed.
• Press ON/OFF button incrementally to adjust the
temperature by 1
o
C per increment.
• The adjustment will increase the temperature,to set
a lower temperature, continue to cycle through the
range.
9.1.5 Set the temperature
• The temperature of water in the tank can also be adjusted during the same
procedure as the filter monitor.
• Turn off the under counter
boiler with the ON/OFF
button.
• Press & hold ON/
OFF button (approx. 12
seconds).
• The display screen shows
the Pr icon.
• Release the ON/OFF
button.
o
C
96
9.1.4 Adjust the UCB boiling water temperature
UCB
