37
Installation instructions & user guide
T210042 v1.00 March 2022 - InstaTap Commercial
SECTION 9 Maintenance
• Continuing on from the temperature setting screen.
• Press & hold button (long push) for approximately
5 seconds until screen changes to show MEDIUM
(default filter setting).
MEDIUM
• Press button (short push) to scroll between the
different filter settings.
SOFT
MEDIUM HARD
• SOFT
• MEDIUM
• HARD
• EMPTY FILTER (no filter monitor).
• With the required filter setting selected, press & hold ON/OFF button (long
push) for 4 seconds to save.
• Press & hold ON/OFF button (long push) for approximately 6 seconds until
display goes blank.
• Press ON/OFF button to turn the UCB5 back on again.
• The filter monitor on the under counter boiler can be changed from the
default MEDIUM setting to HARD or SOFT setting as follows:
• Replace and flush the filter, see pages 34-35.
9.1.6 Set the filter monitor
9.2 Cleaning
!
!
!
!
• To clean tap, font, under-counter appliance and ancillaries, wipe surfaces
with a sanitising wipe and leave to air dry.
Cleaning of the tap and dispensing outlets must only be undertaken with
alcohol or sanitising wipes.
Chemicals should NOT be sprayed onto the tap or UCB / UCC at any time.
Never use strong, corrosive or abrasive cleaning materials on the
InstaTap Tap or UCB / UCC.
This could cause permanent malfunction and void warranty
