32
Installation instructions & user guide
T210047 v1.00 March 2022 - InstaTap Commercial
SECTION 8 Operation
8.4 Dispense chilled water from the UCC
• Make sure the InstaTap is switched on and ready to use, see page 26.
• Familiarise yourself with the tap control icons, see pages 29 - 30.
• To manually dispense
chilled water, place
glass or jug on font.
• Press the chilled icon to
dispense.
8.5 Adjust the chilled water flow rate from the UCC
• The chilled water flow rate have been factory set,
however on-site adjustment may be necessary. The
water flow-rate adjustment knob is on the top of the
UCC, see page 21.
• To adjust, pull flow-rate adjustment knob upwards.
• Turn clockwise to increase, anti-clockwise to reduce.
• As a guide, a small glass (180ml) should take
PUSH L
OCK
approximately 5 seconds to dispense.
• Note
If the flow-rate is faster than this, water passes through the cooling
block too quickly and dispensed water may not be as cool as specified.
