7
Installation instructions & user guide
T210042 v1.00 March 2022 - InstaTap Commercial
SECTION 3 WARNINGS & REGULATORY INFORMATION
appliances, ensure power supply cords are not trapped or damaged.
If damaged they must be replaced by an Instanta service provider or a
qualified electrician.
• Instanta cannot be held responsible for any appliance malfunction if
the water pressure exceeds that stated. If in doubt, consult your water
supply company.
• The install rail supplied must be fitted to ensure compliance with the
S.I.1999 No.1148 The Water Supply (Water fittings) Regulations 1999
Schedule 2 requirement.
• Ensure that all installed silicone tubes are shaded from direct sunlight.
• Instanta cannot be held responsible for limescale related problems even
when a lime-scale reducer has been installed.
• As with all refrigeration systems, irreparable damage can be caused by
laying the chiller on its side or even transporting upside down.
• If the under counter chiller has been transported incorrectly, it should
be placed in the correct upright position and left for 24hours before
attempting to install and commission it. Failure to observe these
precautions could seriously damage the refrigeration system.
• All InstaTap models with chilled functionality must be sanitised during
installation or the commissioning process, please contact us on
0345 6 005 005 to book a commissioning service.
• If your InstaTap is left idle before use, for water taste and quality
reasons, any non-use of more than 48 hours, we recommend a system
flush be performed. On first use after a period of non-use, run the
chilled function for 60 seconds to flush the filter and system. Not
flushing the system may affect the water quality. If taste or water quality
issues persist, a filter change and sanitisation may be required.
