17
●
Load Optimal Defaults
Select this item and press <Enter>. After select [OK], the system will
load optimal defaults. This function also can be achieved by pressing <F9>.
●
Load Failsafe Defaults
Select this item and press <Enter>. After select [OK] for con
fi
rmation,
the system will load Failsafe defaults. Failsafe default values can ensure the
stability of the system to the max, but can not perform the best functions.
This function also can be achieved by pressing <F8>.
3.2 Motherboard Jumper Settings
3.2 Motherboard Jumper Settings
Motherboard jumper setting is the operation of shorting out two pins of the jump-
er to change the interface functions. Refer to the following
fi
gure, and adjust the moth-
erboard functions.
Jumper Setting View
Jumper Setting View
Open the Case Upper Panel
Open the Case Upper Panel
If the operation hereafter is needed, please get the authorization of Inspur Group
Co., Ltd. according to the methods as follows to open the case upper panel:
1. Power off the system (turn off the AC power), then loosen the screws
fi
xed on
Chapter Three System Setup
Chapter Three System Setup
